Programming key
The programming of the key can be achieved remotely to that of the time switch via the programming software available on PC and to its interface box.
Three principal advantages
Saving and duplication of programs
You have the possibility of copying a program on a key, and thus,
quickly duplicating it on other time switches. It is also useful for
a backup of security of your programs of time switches.
Creation of a key library
Each key can correspond to a standard or different program.
As for the user, they can have several keys adapted to their
way of life (day shift, night shift, summer, winter, holidays…).
Executive key programme
When the time switch is in the 'run' mode, it is possible to have
a 'temporary run program'. You need only to introduce a key with
a different programme & wait 10 seconds. The time switch will
acknowledge this key & run it's program. As soon as the key is
removed, the initial program is again valid.
You have the possibility of copying a program on a key, and thus,
quickly duplicating it on other time switches. It is also useful for
a backup of security of your programs of time switches.
Creation of a key library
Each key can correspond to a standard or different program.
As for the user, they can have several keys adapted to their
way of life (day shift, night shift, summer, winter, holidays…).
Executive key programme
When the time switch is in the 'run' mode, it is possible to have
a 'temporary run program'. You need only to introduce a key with
a different programme & wait 10 seconds. The time switch will
acknowledge this key & run it's program. As soon as the key is
removed, the initial program is again valid.
Accessories
Locking key
This key (ref. EG004) allows the user to lock the programming
of the time switch by simple insertion in the device.
Storage module for 3 keys
1 module box (ref. EG006) that clips onto the DIN rail of the board.
This key (ref. EG004) allows the user to lock the programming
of the time switch by simple insertion in the device.
Storage module for 3 keys
1 module box (ref. EG006) that clips onto the DIN rail of the board.
